TMPS 15-115

AC/DC Power Supply TMPS 15 Series, 15 Watt • Fully encapsulated 1.07” x 2.06” x 0.93” package • • • • ErP-ready (95%, 250 periods, perf. criteria B EN 61000-4-11 30%, 25 periods, perf. criteria A >95%, 0.5 periods, perf. criteria A >95%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Reliability Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating 95% max. (non condensing) –25°C to +70°C –40°C to +85°C 3.33 %/K above 55°C Natural convection (20 LFM) 2'000 m max. 94 - 125 kHz (PFM) 115 kHz typ. (PFM) Reinforced Insulation 250 VAC 3'000 VAC 1'000 MΩ min. 430'000 h (MIL-HDBK-217F, ground benign) Plastic resin (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C2680) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte - Operating Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 500 VDC - Calculated MTBF All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2021 Page 3 / 4 TMPS 15 Series, 15 Watt Housing Type Mounting Type Connection Type Soldering Profile Plastic Case PCB Mount THD (Through-Hole Device) Wave Soldering 260°C / 10 s 60 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Weight Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmps15 Outline Dimensions 10.16 6.0 23.5 (0.40) (0.24) (0.93) 4 Pinout Pin Function 1 AC (N) 2 AC (L) 3 +Vout 4 –Vout 3 Ø1.0 (2.06) (1.80) Bottom View 52.4 45.72 (Ø0.04) 0.7 (0.03) 5.0 1 20.32 (0.80) 27.2 (1.07) (0.20) 2 Dimensions in mm (inch) Tolerances: X.X ±0.5 (±0.02) Pin diameter Ø1.0 ±0.1 (Ø0.04 ±0.004) © Copyright 2021 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 30, 2021 Page 4 / 4